X7-8-Install-IG100 Installation Guide
Brocade
®
X7-8 Director Hardware Installation Guide
Preparing for Installation
Safety Precautions
When using this product, observe all danger, caution, and attention notices in this manual. The safety notices are
accompanied by symbols that represent the severity of the safety condition.
See
for translations of safety notices for this product.
General Precautions
DANGER
The procedures in this manual are for qualified service personnel.
DANGER
Before beginning the installation, see the precautions in “Power Precautions.”
CAUTION
Changes or modifications made to this device that are not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
CAUTION
Disassembling any part of the power supply and fan assembly voids the warranty and regulatory certifications.
There are no user-serviceable parts inside the power supply and fan assembly.
CAUTION
Make sure the airflow around the front and back of the device is not restricted.
CAUTION
To protect the serial port from damage, keep the cover on the port when not in use.
CAUTION
Never leave tools inside the chassis.
CAUTION
Use the screws specified in the procedure. Using longer screws can damage the device.
ESD Precautions
DANGER
For safety reasons, the ESD wrist strap should contain a series 1 megaohm resistor.
Power Precautions
DANGER
If the installation requires a different power cord than the one supplied with the device, make sure that you use a
power cord displaying the mark of the safety agency that defines the regulations for power cords in your country.
The mark is your assurance that the power cord can be used safely with the device.
X7-8-Install-IG100
19
Broadcom
Summary of Contents for Brocade X7-8
Page 212: ......
