Briot emotion, Operation Manual

Page: 70 / 210

Using your Edger... Usual procedure
3-69
3.4.4.2 P
RODUCING A JOB WITH GROOVE FINISHING
3.4.4.2.1 O
BJECT
Produce a job with the following characteristics:
HI plastic > Normal lens > Grooving > 33 % Groove > Front and rear safety-bevels > Polishing
Safety-bevel parameters: front depth = 0.20 mm / rear depth = 0.20 mm
3.4.4.2.2 P
ROCEDURE
To carry out the job described above, proceed as follows:
Flow chart 3-4: Production of a job with Drilling finishing
Note: To familiarize yourself with the icons associated with each step or obtain more details
of the action required, refer to the screen on the left page.
Call a job number.
Select HI plastic lens material.
Select NORMAL lens type.
Select GROOVE finishing.
Select 33% sub-finishing.
Select POLISHING option.
Place the lens in the edging chamber.
Start the edging process.
Select 0.2 mm FRONT and REAR SAFETY-BEVELS.
Note: The front safety-bevel value is 0 or 0.2 mm.
The rear safety-bevel value is 0, 0.2, 0.4, 0.6mm.