Briot emotion, Operation Manual

Page: 118 / 210

5-117
=> Maintenance
5.3 TASK LIST
To ensure optimum performance of your e motion , you must carry out a few maintenance operations at regular
intervals.
Maintenance of the Scanform™ unit
→ Cleaning the Scanform™
→
Replacing a stylus tip
→ Replacing the frame clip tube
→
Replacing the centering plate
Maintenance of the centering/blocking system zone
→
Cleaning the ground glass screen
→ Cleaning the lower lens of the collimator
→
Replacing the main fuse
→ Replacing the hand rest
Maintenance of the touch screen zone
→ Cleaning the touch screen
Maintenance of the Edger
→ Clean the edger daily with a spray bottle of water.
→
Replace the flexible lens clamp adaptor pad regularly (every 1000 lenses).
→ Replace the mill bit when a message asks you to do so (1 hour of total drilling time).
→
Check the condition of the lens feeler tips regularly and replace them as soon as they appear to be worn or
damaged (or every 3000 lenses).
→
Dress the wheels when a message asks you to do so.
→ Clean the removable visor regularly, and replace it if necessary.
→
Change the water in the tank regularly if your machine operates in closed water circuit mode.
→ Clean the filters and the tanks regularly.
→
Check the condition of the safety-beveling and grooving wheels and have them replaced by a technician if
necessary.
→
Check the condition of the wheels and have them replaced by a technician if necessary.