Briot emotion, Operation Manual

Page: 142 / 210

Maintenance... Regular maintenance of the edger
5-141
5.7.6 C
LEANING THE FILTERS AND WATER TANK
5.7.6.1 P
RELIMINARY REMARKS
>
Before undertaking any operation, ensure that the machine is switched off: On/Off switch OFF
and mains plug disconnected.
>
Cleaning frequency is left to the discretion of the user, according to the number of lenses which have been
edged. However, Briot recommends cleaning every 500 lenses (mineral and plastic).
>
Gloves and eye shields must be worn. It is advisable to wear an overall.
> Ensure that the dump pipe valve is closed before starting the machine - the red handle must be perpendicular
to the T.
5.7.6.2 P
ROCEDURES
Three situations are possible:
5.7.6.2.1 F
OR DAILY CLEANING
Flow chart 5-5: Daily cleaning of the drawer-filter
5.7.6.2.2 C
OMPLETE CLEANING OF THE TANKS AND FILTERS
#1 Lift the water drain pipe and remove the drawer-filter.
#2 Clean the drawer-filter with a brush.
#3 Clean the drawer-filter.
#4 Refit the drawer-filter.
#1 Empty the settling tank (see “Emptying the water tank”, page 145
#2 Ensure that the dump pipe valve is correctly closed.
#3 Unscrew the water supply pipe from the valve.
#4 Free the drain pipe from the drawer-filter and remove the drawer-filter.
#5 Remove the 2 fixing screws from the pump supporting plate.
#6 Remove the pump supporting plate.
#7 Remove the pump from the pump tank.
#8 Brush the lateral filters of the pump tank.
→ The procedure continues on the next page.