Briot emotion, Operation Manual

Page: 43 / 210

Using your Edger... General principles of use
3-42
3.2.1.2 E
NTERING THE FRAME DATA OR A PATTERN
Create a job number.
Enter the new a job number.
Select the Scanform
Select the frame type.
Insert the pattern or demonstration lens blocked on
the pattern holder.
NOTE: The lower part of the pattern holder should
push the centering nose and the lower parts should
be positioned between the Scanform clips
Select the Scanform
Select the side(s) to be entered.
Select the entry type:
>
Automatic insertion
> Semi-automatic insertion
Place the frame in the Scanform.
Launch the entry for the frame data
Launch the entry for the pattern or
demonstration lens
When the numeric key pad is displayed,
enter the value of the frame bridge.
Entering the frame data
Entering a pattern