Briot emotion, Operation Manual

Page: 42 / 210

3-41
=> Using your Edger
3.2 GENERAL PRINCIPLES OF USE
The standard procedure is carried out by using the different tabs successively.
3.2.1 U
SUAL PROCEDURE
: J
OB CREATION
/
SELECTION
Enable the JOB tab
3.2.1.1 C
ALLING
/C
REATING A JOB
/
PATTERN
Calling an existing pattern from the data base:
Calling an existing job from the data base:
Creating a new profile:
Calling a job from the server data base:
Proceed as follows:
> Select the icon corresponding to the desired action.
>
Then long press this button to select the job/pattern or define the number associated
with the creation of your pattern.
When the numeric key pad is displayed, enter the job number and confirm it.
Result: The shape requested is displayed on the screen. The job number is displayed on the top left
of the display zone. The display is modified according to the job characteristics and the
default configuration values.
Note: Loading a job causes the lens material data, finishing data, etc. to be specified...
automatically.
Note: Upon each creation step, the pattern is saved automatically in the data base.