Briot emotion, Operation Manual

Page: 206 / 210

7-213
=> Technical specifications
7.1 CHARACTERISTICS
>
Automatic initialisation
> Feeling front & rear lens faces in 3 dimensions
>
Equipment:
Mineral roughing wheel
All plastics roughing wheel
Bevel/rimless finishing wheel
Bevel/rimless polishing wheel.
> Automatic clamping pressure
>
Automatic edging pressure adjusted according to material to be edged
> Lens grooving in single width (i.e. W = 0.6 mm (Nylon thread)) or double width (i.e. W = 1.2 mm)
>
Drilling wide choice of holes:
Through holes
Notches
Elongated holes.
> Drilling at fixed 10° angle
>
Safety-beveling of front and/or rear faces of the lens
> Connection for pump if operating in closed water circuit
>
Edging diameter
< or = 80 mm
Rimless (without safety-bevel) >= 17.50 mm
Bevel (without safety-bevel) >= 19.10 mm
Groove (without safety-bevel) >= 18.50 mm
Safety-bevel rimless/groove >= 21 mm.
Safety-bevel >= 21 mm
>
Automatic cleaning of the lens fixing system and of the edging station
> Edging statistics