Briot emotion, Operation Manual

Page: 153 / 210

Maintenance... Adjustments
5-152
5.10.2 A
DJUSTING THE
S
CANFORM
To adjust the Scanform™, proceed as follows:
#1 Press on the top of the application screen.
Result: The menus access screen is displayed.
#2 Press this key
#3 Press this key:
Result: The Scanform™ starts operating .
#4 The icon is displayed. Get the gain adjustment tool No. 14 04 218 .
#5 Ensure that the R and H values marked on the tool are the same as those displayed
on the screen.
If the values are the same, go to the next step.
If the values are not the same, enter the values marked on
the tool using the keys and .
Note: The R value should be around 40 mm and the H value around 24 mm.
#6 Position the tool in the Scanform™ .
#7 Press to start the adjustment.
#8 When the adjustment is finished, check the measured valued which are displayed
on the screen.
Adjustment is correct when all the dots in front of the parameters are green.
Note: If one or more dots are red, repeat the step by pressing the
key. If the problem cannot be solved, please contact your distributor.
#9 Remove the tool.
Press .
Result: The e motion validates this adjustment and proceeds to the next one.