Bowflex HVT Service Manual Download Page 41

Page: 41 / 163

NOTICE:

This document provides instructions for the replacement of the Console Cable Assembly on the Bowflex

HVT

™

machine.

If you need assistance, please call

Bowflex

Customer Service at 1-800-605-3369.

1. Unplug the AC Adapter from the wall outlet and machine.

2. Using a #2 Phillips screwdriver, remove the six indicated screws (by

ovals) from the Console Assembly.

Note:

Be prepared to support the Console Assembly.

3. Slightly pivot the top of the Console Assembly out to expose the Con-

sole Cable.

Note:

Be sure not to crimp the cable by supporting the Console Assem-

bly.

4. Disconnect the Console Cable at the Connector and place the Console

Assembly face down onto a protective material, such as a towel or carpet.

5. Release the Console Cable from the routing guides.

6. Using a #2 Phillips screwdriver, remove the six indicated screws from

the Console Assembly.

7. Carefully flip the Console Assembly over, holding the Console Bezel

Assembly in place on the Console Assembly.

Console Bezel Assembly

Console Assembly

Console Cable

Connector

Summary of Contents for HVT




































































































































































Search results

Summary of Contents for HVT

Reviews:

Related manuals for HVT

Brands by name

Popular brands

Bowflex HVT, Service Manual

Search results

Summary of Contents for HVT

Reviews:

Related manuals for HVT

Brands by name

Popular brands