85
Right Rope
Stopper
11. With the new Load-Bearing, Floating Pulley, route the rope and
attach the Pulley exactly as it was before removal on the old Floating
Pulley.
12. Repeat with the remaining Pulley, and route and attach the Pulley
to the new Floating Pulley.
13. Replace the rope and stopper into the frame and confirm it is cor-
recty routed by trying the Lower or Middle Hand Grips.
14. Re-assemble the machine in the reverse order of when the parts
were removed.
15. Final Inspection
Inspect your machine to ensure that all hardware is tight and compo-
nents are properly assembled.
Do not use until the machine has been fully assembled
and inspected for correct performance in accordance
with the Owner’s Manual.
