Bowflex HVT Service Manual Download Page 143

Page: 143 / 163

143

The image to the right shows the proper location of the Servo Motor

and Brake Assembly. If the Servo Motor is loose, the Brake Assembly

and/or the Servo Motor may have completely fallen off as shown in

the images below.

5. If the Servo Motor is not attached to the Pivot Housing, skip to

Step 9.

If the Servo Motor is still secured to the Pivot Housing, push the

Release Tab away from the Servo Motor while supporting the Brake

Assembly.

6. Now slightly shift the Servo Motor toward the front of the machine

while still supporting the Brake Assembly. As the Brake Assembly is

released, allow it to gently pivot downward.

Note:

Observe how components are attached to assist with re-

assembly.

Brake

Assembly

Servo Motor

Release Tab

Brake Assembly loose:

Servo Motor loose:

Pivot Housing

Summary of Contents for HVT




































































































































































Search results

Summary of Contents for HVT

Reviews:

Related manuals for HVT

Brands by name

Popular brands

Bowflex HVT, Service Manual

Search results

Summary of Contents for HVT

Reviews:

Related manuals for HVT

Brands by name

Popular brands