Bowflex HVT Service Manual Download Page 133

Page: 133 / 163

133

NOTICE:

This document provides instructions for the replacement of the Power Inlet on the Bowflex

HVT

™

machine.

If you need assistance, please call

Bowflex

Customer Service at 1-800-605-3369.

1. Unplug the AC Adapter from the wall outlet and machine.

2. Using a #2 Phillips screwdriver, remove the four screws that secure the

Lower Rear Shroud- two on the right side (indicated by ovals) and two on

the left side (not shown).

3. Slightly remove the Lower Rear Shroud exposing the Power Cable.

Note:

The Power Cable is attached to the inside of the Lower Rear

Shroud. Be sure not to crimp the cable by placing the Lower Rear Shroud

close to the assembly.

4. Disconnect the Power Cable at the connector.

Power Inlet

Lower Rear Shroud

Power Cable

Connector

Summary of Contents for HVT




































































































































































Search results

Summary of Contents for HVT

Reviews:

Related manuals for HVT

Brands by name

Popular brands

Bowflex HVT, Service Manual

Search results

Summary of Contents for HVT

Reviews:

Related manuals for HVT

Brands by name

Popular brands