127
Note:
This procedure shows the replacement of the Right Platform
Frame. Adjust to the other side of the machine to replace the Left Platform
Frame.
5. Safely remove the Lower Hand Grip and the Snap Hook from the
machine.
6. Using a #2 Phillips screwdriver, remove the two indicated screws (with
arrows) that secure the Lower Pulley Shroud to the machine. Remove
them and place outside of the work area.
Lower Hand Grip
Lower Pulley Shroud
7. Slowly pull out enough of the Lower Rope to be able to remove the
Securing Ball from it.
The Rope will be under tension and will want to pull itself into
the Platform Frame. Be sure not to allow any fingers or hands
to be pinched.
Note:
Photos are only to assist with removing the Securing Ball.
8. Remove the Securing Ball and gently lower the rope into the Platform
Frame, releasing it with enough space to not pinch any fingers or hands.
Note:
Be sure to observe how the rope routes through the Lower Pulley
to assist with re-assembly. To remove the Securing Ball: Slide the Secur-
ing Ball up the rope, remove the Center Stopper from the rope, and slide
the Securing Ball off the rope.
9. From the back of the machine, pull the Lower Rope from the Right
Platform Frame.
10. Using a 6mm hex wrench, remove the 3 indicated screws (with arrow
and oval) from the Support Arm.
Right Support Arm
Right Platform Frame
