154
1. Unplug the AC Adapter from the wall outlet and machine.
Note:
This procedure shows the replacement of the Left Upper Pulley
Retainer. Adjust to the other side of the machine for the Right Upper Pul-
ley Retainer.
2. Safely remove the Upper Hand Grip and the Snap Hook from the Upper
Rope.
Note:
Place the Snap Hook in your pocket or somewhere you can easily
access it from the upper, rear area of the machine.
3. Slowly pull out enough of the Upper Rope to be able to remove the
Securing Ball from it.
The Rope will be under tension and will want to pull itself into
the Upper Pulley Shroud. Be sure not to allow any fingers or
hands to be pinched.
4. While keeping the rope from retracting, remove the Securing Ball from
the rope. Do not release the rope until instructed.
Note:
Be sure to observe how the rope routes through the Upper Pulley
to assist with re-assembly. To remove the Securing Ball: Slide the Secur-
ing Ball up the rope, remove the Center Stopper from the rope, and slide
the Securing Ball off the rope.
Upper Pulley
Retainer
Upper Hand Grip
Snap Hook
Securing Ball
Securing Ball
Center Stopper
