102
10. The Fan Assembly Shroud has the Lower Cable secured to the
upper right corner. Slightly pivot the Fan Assembly Shroud to the
right side of the machine without damaging the Lower Cable.
11. With a 3-4’ piece of wire or rope, tie one end of it through the loop
on the end of the Lower Right Rope. Secure the other end of the wire
or rope to the Support Arm. This will ensure it does not get pulled into
the Right Platform Frame.
12. Slowly pull out enough of the Lower Rope to be able to remove
the Securing Ball from it.
The Rope will be under tension and will want to pull itself
into the Platform Frame. Be sure not to allow any fingers
or hands to be pinched.
Note:
Photos are only to assist with removing the Securing Ball.
13. Remove the Securing Ball and gently lower the rope into the
Platform Frame, releasing it with enough space to not pinch any
fingers or hands.
Note:
Be sure to observe how the rope routes through the Lower
Pulley to assist with re-assembly. To remove the Securing Ball: Slide
the Securing Ball up the rope, remove the Center Stopper from the
rope, and slide the Securing Ball off the rope.
Securing Ball
Center Stopper
