Bosch VIP XD Installation And Operating Manual Download

Page: 39 / 80

VIP XD

Configuration Using a Web Browser | en

Bosch Security Systems

Installation and Operating Manual

DOC | V4.0 | 2009.06

Format

You can select the data format of the alarm message.

–

Standard

E-mail.

–

SMS

E-mail in SMS format to an e-mail-to-SMS gateway (for example to send an alarm by

cellphone).

Destination address

Enter the e-mail address for alarm e-mails here. The maximum address length is

49 characters.

Sender name

Enter a unique name for the e-mail sender, for example the location of the unit. This will make

it easier to identify the origin of the e-mail.

Test e-mail

You can test the e-mail function by clicking the

Send Now

button. An alarm e-mail is

immediately created and sent.

CAUTION!

When a cellphone is used as the receiver, make sure to activate the e-mail or SMS function,

depending on the format, so that these messages can be received.

You can obtain information on operating your cellphone from your cellphone provider.

Summary of Contents for VIP XD

















































































Search results

Summary of Contents for VIP XD

Reviews:

Related manuals for VIP XD

Brands by name

Popular brands

Bosch VIP XD, Installation And Operating Manual

Search results

Summary of Contents for VIP XD

Reviews:

Related manuals for VIP XD

Brands by name

Popular brands