Bosch VIP XD Installation And Operating Manual Download

Page: 50 / 80

en | Configuration Using a Web Browser

VIP XD

DOC | V4.0 | 2009.06

Installation and Operating Manual

Bosch Security Systems

Configuration

You can save configuration data for the VIP XD on a computer and then load saved

configuration data from a computer to the unit.

Upload

Enter the full path of the file to upload or click

Browse

to select the required file.

Make certain that the file to be loaded comes from the same unit type as the unit you

want to configure.

Next, click

Upload

to begin transferring the file to the unit. The progress bar allows you

to monitor the transfer.

Once the upload is complete, the new configuration is activated. The time remaining is shown

by the message

going to reset Reconnecting in ... seconds

. The unit reboots automatically

once the upload has successfully completed.

Download

Click the

Download

button. A dialog box opens.

Follow the on-screen instructions to save the current settings.

SSL certificate

To be able to work with an SSL encrypted data connection, both ends of a connection must

hold the relevant certificates. You can upload the SSL certificate, comprising one or multiple

files, onto the VIP XD.

If you wish to upload multiple files onto the VIP XD, you must select them consecutively.

Enter the full path of the file to upload or click

Browse

to select the required file.

Next, click

Upload

to begin transferring the file to the unit.

Once all files have been successfully uploaded, the unit must be rebooted. In the address

bar of your browser, enter

/reset

after the IP address of the VIP XD (for example

192.168.0.32/reset

The new SSL certificate is valid.

Decoder logo

If no video camera is selected, the decoder logo is displayed instead of the camera image. It is

possible to create your own decoder logo and load it onto the VIP XD.

To create the logo, you need a special program, which is available from Bosch Security

Systems. Standard image formats are not supported for the decoder logo.

Enter the full path of the file to upload or click

Browse

to select the required file.

Click

Upload

to transfer the file to the unit.

Delete decoder logo

Click

Delete decoder logo

to remove the decoder logo.

Maintenance log

You can download an internal maintenance log from the unit to send it to Customer Service

for support purposes. Click

Download

and select a storage location for the file.

NOTICE!

The certificate must be created in the format *.pem so that it can be accepted by the unit.

Summary of Contents for VIP XD

















































































Search results

Summary of Contents for VIP XD

Reviews:

Related manuals for VIP XD

Brands by name

Popular brands

Bosch VIP XD, Installation And Operating Manual

Search results

Summary of Contents for VIP XD

Reviews:

Related manuals for VIP XD

Brands by name

Popular brands