Bosch VIP XD Installation And Operating Manual Download

Page: 60 / 80

en | Operation

VIP XD

DOC | V4.0 | 2009.06

Installation and Operating Manual

Bosch Security Systems

6.5

Operation with Management Software

The use of management software such as VIDOS is recommended for operating larger systems

with multiple senders and receivers.

VIDOS is a software package for operating, controlling and managing CCTV installations (such

as surveillance systems) at remote locations. It runs under Microsoft Windows operating

systems. It is primarily designed for decoding video, audio and control data received from a

remote sender and for the convenient control of hardware connections.

Many options are provided for operation and configuration when using a VIP XD with VIDOS.

Please refer to the software documentation for more details.

Another program that supports the VIP XD is Bosch Video Management System. Bosch Video

Management System is an IP video security solution that enables the seamless management

of digital video, audio and data over any IP network. It was developed for use with Bosch

CCTV products as one component of an extensive video security management system. It

allows you to integrate your existing components into a simple-to-control system or into the

entire Bosch range, benefiting from a complete security solution based on the latest

technology and years of experience.

Summary of Contents for VIP XD

















































































Search results

Summary of Contents for VIP XD

Reviews:

Related manuals for VIP XD

Brands by name

Popular brands

Bosch VIP XD, Installation And Operating Manual

Search results

Summary of Contents for VIP XD

Reviews:

Related manuals for VIP XD

Brands by name

Popular brands