Bosch VIP XD Installation And Operating Manual Download

Page: 29 / 80

VIP XD

Configuration Using a Web Browser | en

Bosch Security Systems

Installation and Operating Manual

DOC | V4.0 | 2009.06

5.7

Decoder Profile

In this screen you can set the various options for the display of video images on an analog

monitor or VGA monitor. A number of presets are available for configuring the VGA video

output signal. These presets can be adapted to individual requirements if necessary.

Monitor name

You can give the monitor connected to the VIP XD a name to make it easier to identify. The

name makes the task of administering multiple units in larger video monitoring systems

easier, for example using the VIDOS or Bosch Video Management System programs.

The monitor name allows you to remotely identify the monitor location. For this reason, enter

a name that makes it as easy as possible to quickly identify the location.

Standard

You can adapt the video output signal to the monitor you are using. Eight pre-configured

settings for VGA monitors are available in addition to the PAL and NTSC options for analog

video monitors.

Each pre-configured setting gives priority to different factors (resolution, border settings,

refresh rate).

Details of the settings can be seen in the

VGA

field. Here you can also adapt the options to

individual requirements if necessary.

Test different pre-configured settings from the list to obtain an optimum monitor image.

After selecting a setting, click the

Set

button to activate the setting at the video output.

Overscan

You can use the Overscan function to display images with clear, straight edges that go right up

to the monitor margins.

Deactivate the Overscan function if you are using an analog monitor and single view display.

Window layout

You can specify the default image layout for the monitor. The image layout can also be

selected at any time during operation on the

CONNECTIONS

page.

CAUTION!

Be sure to choose the correct video standard to avoid damaging the monitor. Selecting a VGA

setting with values outside the technical specification of the monitor can result in severe

damage to the monitor. Refer to the technical documentation of the monitor you are using.

Summary of Contents for VIP XD

















































































Search results

Summary of Contents for VIP XD

Reviews:

Related manuals for VIP XD

Brands by name

Popular brands

Bosch VIP XD, Installation And Operating Manual

Search results

Summary of Contents for VIP XD

Reviews:

Related manuals for VIP XD

Brands by name

Popular brands