Bosch VIP XD Installation And Operating Manual Download

Page: 75 / 80

VIP XD

Glossary | en

Bosch Security Systems

Installation and Operating Manual

DOC | V4.0 | 2009.06

MIB

Management Information Base; a collection of information for remote servicing using the

SNMP protocol

MPEG-2

Improved video/audio compression standard, compression on highest level allows images in

studio quality; now established as broadcast standard

MPEG-4

A further development of MPEG-2 designed for transmitting audiovisual data at very low

transfer rates (for example over the Internet)

MSS

Maximum Segment Size; maximum byte figure for the user data in a data packet

Net mask

A mask that explains which part of an IP address is the network address and which part is the

host address. It is usually written in dotted decimal notation, for example "255.255.255.192."

NTP

Network Time Protocol; a standard for synchronizing computer system clocks via packet-

based communication networks. NTP uses the connectionless network protocol UDP. This

was developed specifically for enabling time to be reliably transmitted over networks with

variable packet runtime (Ping).

Optical Fiber; now used predominantly as the transmission medium for line-borne

telecommunication processes (glass fiber cable)

Parameters

Values used for configuration

QCIF

Quarter CIF, video format with 176 × 144/120 pixels

RADIUS server

Remote Authentication Dial-In User Service: a client/server protocol for the authentication,

authorization and accounting of users with dial-up connections on a computer network.

RADIUS is the de-facto standard for central authentication of dial-up connections via Modem,

ISDN, VPN, Wireless LAN (

see

802.1x) and DSL.

RFC 868

A protocol for synchronizing computer clocks over the Internet

RS-232/-422/-485

Standards for serial data transmission

RTP

Real-Time Transport Protocol; a transmission protocol for real-time video and audio

RTSP

Real-Time Streaming Protocol; network protocol for controlling the continuous transmission

of audiovisual data (streams) or software over IP-based networks

SFP

Small Form-factor Pluggable; small, standardized module for network connections, designed

as a plug connector for high-speed network connections

Summary of Contents for VIP XD

















































































Search results

Summary of Contents for VIP XD

Reviews:

Related manuals for VIP XD

Brands by name

Popular brands

Bosch VIP XD, Installation And Operating Manual

Search results

Summary of Contents for VIP XD

Reviews:

Related manuals for VIP XD

Brands by name

Popular brands