Bosch VIP XD Installation And Operating Manual Download

Page: 49 / 80

VIP XD

Configuration Using a Web Browser | en

Bosch Security Systems

Installation and Operating Manual

DOC | V4.0 | 2009.06

5.21

Maintenance

Firmware

The VIP XD is designed in such a way that its functions and parameters can be updated with

firmware. To do this, transfer the current firmware package to the unit via the selected

network. It will then be automatically installed there.

In this way, a VIP XD can be serviced and updated remotely without a technician having to

change the installation on site.

You obtain the current firmware from your customer service or from the download area on our

Internet site.

First store the firmware file on your hard drive.

Enter the full path of the firmware file in the field or click

Browse

to locate and select the

file.

Next, click

Upload

to begin transferring the file to the unit. The progress bar allows you

to monitor the transfer.

The new firmware is unpacked and the Flash EPROM is reprogrammed. The time remaining is

shown by the message

going to reset Reconnecting in ... seconds

. The unit reboots

automatically once the upload has successfully completed.

If the operating status LED lights up red, the upload has failed and must be repeated. To

perform the upload you must now switch to a special page:

In the address bar of your browser, enter

/main.htm

after the IP address of the VIP XD

(for example

192.168.0.32/main.htm

Repeat the upload.

CAUTION!

Before launching the firmware upload make sure that you have selected the correct upload

file. Uploading the wrong files can result in the unit no longer being addressable, in which

case you must replace the unit.

You should never interrupt the installation of firmware. An interruption can lead to the flash-

EPROM being incorrectly programmed. This in turn can result in the unit no longer being

addressable, in which case it will have to be replaced. Even changing to another page or

closing the browser window leads to an interruption.

Summary of Contents for VIP XD

















































































Search results

Summary of Contents for VIP XD

Reviews:

Related manuals for VIP XD

Brands by name

Popular brands

Bosch VIP XD, Installation And Operating Manual

Search results

Summary of Contents for VIP XD

Reviews:

Related manuals for VIP XD

Brands by name

Popular brands