Bosch VIP XD Installation And Operating Manual Download

Page: 73 / 80

VIP XD

Glossary | en

Bosch Security Systems

Installation and Operating Manual

DOC | V4.0 | 2009.06

Glossary

Symbols

10/100/1000 Base-T IEEE-802.3 specification for 10, 100 or 1000 Mbps Ethernet

802.1x

The IEEE 802.1x standard provides a general method for authentication and authorization in

IEEE-802 networks. Authentication is carried out via the authenticator, which checks the

transmitted authentication information using an authentication server (

see

RADIUS server)

and approves or denies access to the offered services (LAN, VLAN or WLAN) accordingly.

ARP

Address Resolution Protocol: a protocol for mapping MAC and IP addresses

Baud

Unit of measurement for the speed of data transmission

bps

Bits per second, the actual data rate

BVIP

Bosch Video over IP unit

CABAC

Context-based Adaptive Binary Arithmetic Coding; an effective way to compress binary data

without loss. In the video standard MPEG-4/Part10 (H.264/AVC), CABAC is characterized by

high picture quality, a high compression rate and high computing requirements.

CompactFlash; interface standard, for digital storage media amongst other things. Used in

computers in the form of CF cards, digital cameras and Personal Digital Assistants (PDA).

CIF

Common Intermediate Format, video format with 352 × 288/240 pixels

DHCP

Dynamic Host Configuration Protocol: uses an appropriate server to enable dynamic

assignment of an IP address and other configuration parameters to computers on a network

(Internet or LAN)

DNS

Domain Name System, mainly used for converting domain names to IP addresses

DynDNS

DNS hosting service that works according to RFC 2845 and stores the IP addresses of its

clients in a database, ready for use

FTP

File Transfer Protocol

Full duplex

Simultaneous data transmission in both directions (sending and receiving)

GBIC

GigaBit Interface Converter; applied in network technology to render interfaces flexible, for

converting an electrical interface into an optical interface, for example. This enables flexible

Summary of Contents for VIP XD

















































































Search results

Summary of Contents for VIP XD

Reviews:

Related manuals for VIP XD

Brands by name

Popular brands

Bosch VIP XD, Installation And Operating Manual

Search results

Summary of Contents for VIP XD

Reviews:

Related manuals for VIP XD

Brands by name

Popular brands