Bosch VIP XD Installation And Operating Manual Download

Page: 19 / 80

VIP XD

Installation | en

Bosch Security Systems

Installation and Operating Manual

DOC | V4.0 | 2009.06

4.3

Power On/Power Off

Power Supply

The VIP XD comes with a plug-in power supply unit (PSU) with four primary adapters and a

terminal block. The VIP XD does not have a power switch. The VIP XD is ready for operation as

soon as it is connected to the power supply.

Plug the terminal block with the PSU cable connected to it into the orange socket on the

VIP XD.

Ensure that the correct primary adapter is attached to the power supply unit and that a

suitable power outlet is available.

Plug the power supply unit into the grounded power outlet. The unit is ready for

operation as soon as the operating status LED stops flashing red during start-up and

lights up green.

Provided the network connection has been correctly made, the green

LED also lights up.

The flashing orange

LED indicates data traffic on the network.

4.4

Setup Using the Configuration Manager

The

Configuration Manager

program can be found on the product CD contained in the scope

of delivery. This program allows you to implement and set up new video servers in the

network quickly and conveniently.

Installing the Program

Insert the CD into the computer's CD-ROM drive.

If the CD does not start automatically, open the

Configuration Manager

directory using

Windows Explorer and double-click

Setup.exe

Follow the on-screen instructions.

CAUTION!

The VIP XD may only be operated using the supplied PSU with the correct primary adapter for

your power outlet.

Where necessary, use suitable equipment to ensure that the power supply is free from

interference such as voltage surges, spikes or voltage drops.

Do not connect the VIP XD to the power supply until all other connections have been made.

NOTICE!

Using the Configuration Manager to set all parameters in the VIP XD is an alternative to

configuration by means of a Web browser, as described in chapter 5 of this manual.

Summary of Contents for VIP XD

















































































Search results

Summary of Contents for VIP XD

Reviews:

Related manuals for VIP XD

Brands by name

Popular brands

Bosch VIP XD, Installation And Operating Manual

Search results

Summary of Contents for VIP XD

Reviews:

Related manuals for VIP XD

Brands by name

Popular brands