Bosch VIP XD, Installation And Operating Manual

Page: 46 / 80

46 en | Configuration Using a Web Browser VIP XD
DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems
You can activate and configure encryption of the media data (video, audio and metadata) on
the Encryption page (see Section 5.20 Encryption, page 48 ).
RCP+ port 1756
To exchange connection data, you can activate the unsecured RCP+ port 1756. If you want
connection data to be transmitted only when encrypted, select the Off option to deactivate
the port.
Telnet support
If you want to allow only secure connections with encrypted data transmission, you must
select the Off option to deactivate Telnet support. The unit will then no longer be accessible
using the Telnet protocol.
Interface mode ETH
If necessary, select the Ethernet link type for the ETH interface. Depending on the unit
connected, it may be necessary to select a special operation type.
Network MSS (Byte)
You can set the maximum segment size for the IP packet's user data. This gives you the option
to adjust the size of the data packets to the network environment and to optimize data
transmission. Please comply with the MTU value of 1,514 bytes in UDP mode.
Enable DynDNS
DynDNS.org is a DNS hosting service that stores IP addresses in a database ready for use. It
allows you to select the VIP XD via the Internet using a host name, without having to know the
current IP address of the unit. You can enable this service here. To do this, you must have an
account with DynDNS.org and you must have registered the required host name for the unit
on that site.
Host name
Enter the host name registered on DynDNS.org for the VIP XD here.
User name
Enter the user name you registered at DynDNS.org here.
Password
Enter the password you registered at DynDNS.org here.
Force registration now
You can force the registration by transferring the IP address to the DynDNS server. Entries
that change frequently are not provided in the Domain Name System. It is a good idea to force
the registration when you are setting up the device for the first time. Only use this function
when necessary and no more than once a day, to avoid the possibility of being blocked by the
service provider. To transfer the IP address of the VIP XD, click the Register button.
i
NOTICE!
If you want to allow only secure connections with SSL encryption, you must select the Off
option for each of the parameters HTTP browser port , RCP+ port 1756 and Telnet support .
This deactivates all unsecured connections. Connections will then only be possible via the
HTTPS port.
i
NOTICE!
Information about the service, registration process and available host names can be found at
DynDNS.org.