Bosch VIP XD Installation And Operating Manual Download

Page: 40 / 80

en | Configuration Using a Web Browser

VIP XD

DOC | V4.0 | 2009.06

Installation and Operating Manual

Bosch Security Systems

5.14

Alarm Task Editor

As an alternative to the alarm settings on the various alarm pages, you can enter your desired

alarm functions in script form here. This will overwrite all settings and entries on the other

alarm pages.

Click the

Examples

link under the

Alarm Task Editor

field to see some script examples. A

new window will open.

Enter new scripts in the

Alarm Task Editor

field or change existing scripts in line with

your requirements.

When you are finished, click the

Set

button to transmit the scripts to the unit. If the

transfer was successful, the message

Script successfully parsed

is displayed over the

text field. If it was not successful, an error message will be displayed with further

information.

CAUTION!

Editing scripts on this page overwrites all settings and entries on the other alarm pages. This

procedure cannot be reversed.

In order to edit this page, you must have programming knowledge and be familiar with the

information in the

Alarm Task Script Language

document. You can find the document on the

product CD supplied (see

Section 3.1 Scope of Delivery, page 9

Summary of Contents for VIP XD

















































































Search results

Summary of Contents for VIP XD

Reviews:

Related manuals for VIP XD

Brands by name

Popular brands

Bosch VIP XD, Installation And Operating Manual

Search results

Summary of Contents for VIP XD

Reviews:

Related manuals for VIP XD

Brands by name

Popular brands