Bosch VIP XD Installation And Operating Manual Download

Page: 15 / 80

VIP XD

Installation | en

Bosch Security Systems

Installation and Operating Manual

DOC | V4.0 | 2009.06

Installation

4.1

Preparations

Thanks to its ultra-compact dimensions, the VIP XD is particularly well suited to installation in

cabinets or consoles where space is at a premium.

Please ensure the following installation conditions:

–

Do not install the unit close to heaters or other heat sources. Avoid locations exposed to

direct sunlight.

–

Allow sufficient space for running cables.

–

Ensure that the unit has adequate ventilation.

–

When making connections, use only the cables supplied or use appropriate cables

immune to electromagnetic interference.

–

Position and run all cables so that they are protected from damage, and provide

adequate cable strain relief where needed.

–

Avoid impacts, blows and severe vibrations as these can irreparably damage the unit.

CAUTION!

The unit is intended for use indoors or in housings.

Select a suitable location for installation that guarantees to meet the environmental

conditions. The ambient temperature must be between 0 and +50 °C (+32 and +122 °F). The

relative humidity must not exceed 95%.

The VIP XD generates heat during operation, so you should ensure that there is adequate

ventilation and enough clearance between the unit and heat-sensitive objects or equipment.

Summary of Contents for VIP XD

















































































Search results

Summary of Contents for VIP XD

Reviews:

Related manuals for VIP XD

Brands by name

Popular brands

Bosch VIP XD, Installation And Operating Manual

Search results

Summary of Contents for VIP XD

Reviews:

Related manuals for VIP XD

Brands by name

Popular brands