Bosch Rexroth IndraDrive M Applications Manual Download Page 118

Page: 118 / 153

Fig. 11-4:

Translation of the original declaration of conformity for the optional

safety technology module "L3" [STO (Safe Torque Off)]

The declaration of conformity is expected to be available in the

English language with signatures as of July 2014.
If you have access to the Bosch Rexroth Intranet, please

download the declaration of conformity

here

; otherwise, please

contact your responsible sales partner.

DOK-INDRV*-SI3-**VRS**-AP06-EN-P
Rexroth IndraDrive Integrated Safety Technology "Safe Torque Off" (as of MPx-16)

Bosch Rexroth AG

115/149

Declarations of conformity

LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01

Summary of Contents for Rexroth IndraDrive M


























































































































































Search results

Summary of Contents for Rexroth IndraDrive M

Reviews:

Related manuals for Rexroth IndraDrive M

Brands by name

Popular brands

Bosch Rexroth IndraDrive M, Applications Manual

Search results

Summary of Contents for Rexroth IndraDrive M

Reviews:

Related manuals for Rexroth IndraDrive M

Brands by name

Popular brands