Bosch Rexroth IndraDrive M Applications Manual Download Page 115

Page: 115 / 153

11.1

IndraDrive Cs (HCS01)

The "HCS01" drive controller of the "IndraDrive Cs" range complies with the

protection goals of the Low-Voltage Directive 2006/95/EC.
We declare conformity with the Machinery Directive for the optional safety

technology modules "L4" [STO (Safe Torque Off) and SBC (Safe Brake

Control)] and "L3" [STO (Safe Torque Off)].

Fig. 11-1:

Declaration of conformity for the optional safety technology modules

"L4" [STO (Safe Torque Off) and SBC (Safe Brake Control)] and "L3"

[STO (Safe Torque Off)]

Bosch Rexroth AG

DOK-INDRV*-SI3-**VRS**-AP06-EN-P

Rexroth IndraDrive Integrated Safety Technology "Safe Torque Off" (as of MPx-16)

112/149

Declarations of conformity

LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01

Summary of Contents for Rexroth IndraDrive M


























































































































































Search results

Summary of Contents for Rexroth IndraDrive M

Reviews:

Related manuals for Rexroth IndraDrive M

Brands by name

Popular brands

Bosch Rexroth IndraDrive M, Applications Manual

Search results

Summary of Contents for Rexroth IndraDrive M

Reviews:

Related manuals for Rexroth IndraDrive M

Brands by name

Popular brands