Bosch rexroth CytroForce-M, Operating Manual

Page: 5 / 85

5 / 85
Servo-hydraulic actuator
Required and supplementary documentation
Bosch Rexroth AG RE62270-B, 01.21
1 About this documentation
1.1 About this documentation
This documentation is valid for the following products:
●
Servo-Hydraulic Actuator "CytroForce-M"
A detailed product description can be found in
⮫
Chapter 5 “About this
product” on page 21. For the exact scope of delivery of the servo-hydraulic
actuator ordered by you, please refer to your order confirmation.
This documentation is intended for fitters, operators, service technicians,
project planners, and plant operators. This documentation contains important
information on the safe and proper mounting, transport, commissioning, opera-
tion, use, maintenance, demounting and simple troubleshooting of the servo-
hydraulic actuator. Read this documentation completely and thoroughly, espe-
cially
⮫
Chapter 2 “Safety instructions” on page 11, before working with the
product.
1.2 Required and supplementary documentation
The product must not be commissioned until you have been provided with the
documentation marked with the book symbol and you have understood and
observed it.
Title Document
number
Document type
System documentation from the system manu-
facturer
General informa-
tion on the com-
plete system
Order confirmation Shows the scope
of supply
Wiring diagram (description of system struc-
ture and interfaces)
Schematic dia-
gram
Installation drawing Layout plan
Hydraulic circuit diagram Schematic dia-
gram
Declaration of incorporation for the servo-
hydraulic actuator
Document
⮫
Chapter 16.2
“Declaration of
incorporation”
on page 78
Servo-hydraulic actuator CytroForce-M Inte-
grated or CytroForce-M Split
R: 62280, R.
62282
Data sheet
Hydraulic valves for industrial applications R: 07600-B Operating instruc-
tions
Rexroth IndraDrive MPx-20 Functions R911345608 Application
manual
Rexroth IndraDrive MPx-16 to MPx- 20 and
PSB
R911328651 Parameter
description