Bosch rexroth CytroForce-M, Operating Manual

Page: 37 / 85

37 / 85
Servo-hydraulic actuator
Unpacking
Bosch Rexroth AG RE62270-B, 01.21
7 Installation
7.1 General
CAUTION
Leaking hydraulic fluid! Slip hazard due to oily surfaces
or leaking hydraulic fluid. Damage to the servo-hydraulic
actuator.
−
Immediately remove leaking hydraulic fluid.
−
Secure and mark the danger zone.
−
Use an oil binding agent in order to contain and
secure spilled or excess hydraulic fluid.
−
Wear your personal protective equipment such as
safety shoes and gloves.
−
Contact Bosch Rexroth for proper refilling of the
servo-hydraulic actuator.
NOTICE
Incorrect connection of electric components. Risk of
short-circuit and damage!
−
Connect the electrical components according to the
overview circuit diagram and the pin assignment.
NOTICE
Missing seals and plugs! Liquids and foreign particles
may penetrate and damage the product.
−
Before starting the installation make sure that all
seals and plugs of the connections are tight.
NOTICE
Insufficient installation space! Risk of damage to compo-
nents! Insufficient accessibility may make the installation
or the exchange of components more difficult or impos-
sible. Components, e.g. safety-related pipes, cannot be
properly mounted or might be damaged.
−
Make sure that the installation space is sufficient. The
dimensions of the servo-hydraulic actuator can be
found on the installation drawing.
−
At no time (e.g. handling, mounting) must the servo-
hydraulic actuator be exposed to impermissible
mechanical loading.
NOTICE
Condensed water in electrical components! Risk of
short-circuit!
−
Let the electrical components acclimatize themselves
for several hours, condensed water may form.
NOTICE
Major potential differences! Danger of destruction of
electrical components by connecting or disconnecting
connectors under voltage.
−
De-energize the relevant system part before installing
electrical components or when connecting and dis-
connecting connectors.
7.2 Unpacking
CAUTION
Parts falling out! Risk of injury! If the packaging is
opened improperly, parts may fall out and cause injuries
or damage to the parts.
−
Put the packaging on level, bearing ground.
−
Only open the packaging from the top.
Dispose of the packaging in accordance with the national regulations of your
country.