Bosch DESAXL Instruction Manual Download Page 62

Page: 62 / 76

| 62

Bosch Security Systems | November 17, 2004

DÉSA

Instruction Manual

Remote Client Guide

10.3.1

Setup Button (before connection)

Setup is done while no connection is active for a DÉSA
Server.

10.3.1.1

About DÉSA

Remote

Tab

Provides a summary of pertinent system information.

10.3.1.2

Setup Configuration Tab

Option

Description

Modem Connection,
Reconnect Automatically

When checked, the DÉSA

automatically re-establishes the modem connection, in the event it is

lost. A designated number of connection retries cab be indicated.

Display Auxiliary Status
BAR

For a connected server, this shows/hides the

Alarm

and

Auxiliary

icons below the Camera icons .

Watermark

Watermarked

is displayed in the view of searched video on the Remote Client.

Remote Video Recording

Live video storage designation: on the remote PC (for later search and review), or streamed from the
server.

A. Record live video

If checked, video displayed during a remote connection is also written to the local hard drive
storage specified by the

Select Drive

setting.

NOTE: This consumes disk space at a fairly rapid rate, and may fill up local hard disk storage

if left connected!

B. Save recorded video on search

If checked, searched video is automatically written to local storage (same as

Record live video

Video that is recorded live, or in response to a search, is available for review via

when

the Remote Client is disconnected from all DÉSA

Servers.

C. Select Drive

Select Drive designates the storage location for recorded video. It is strongly recommended to choose
a drive other than the system drive of the Remote Client, to avoid filling up the system drive.

Summary of Contents for DESAXL













































































Search results

Summary of Contents for DESAXL

Reviews:

Related manuals for DESAXL

Brands by name

Popular brands

Bosch DESAXL, Instruction Manual

Search results

Summary of Contents for DESAXL

Reviews:

Related manuals for DESAXL

Brands by name

Popular brands