Bosch DESAXL Instruction Manual Download Page 70

Page: 70 / 76

| 70

Bosch Security Systems | November 17, 2004

DÉSA

Instruction Manual

Remote Client Guide

10.4.4.4

Disconnecting from a Local

•

To disconnect from the Local Server:

1. Click

Stop

. This changes its label to

Live

2. Click

Disconnect.

3. When prompted, click

to Disconnect.

10.5 Searching Archived Video

•

Click

to open the

Search screen

Search Mode Select

- The Remote Client allows searching of archived video. Options are as follows:

Backup Data

is used for video that was saved from the server to the internal HDD or removable media on

the Remote Client.

Removable HDD Drive Data

is used for video the has been stored on a HDD that has been removed from

the server.

Server NowScreen

is used for searching video that was recorded on the Remote Client when the

Record Live

Video

option is selected in the

Setup Configuration

of the Remote Client.

Server Search Data

is used for searching video from the server. This option must be selected in the

Setup

Configuration

of the Remote Client.

Summary of Contents for DESAXL













































































Search results

Summary of Contents for DESAXL

Reviews:

Related manuals for DESAXL

Brands by name

Popular brands

Bosch DESAXL, Instruction Manual

Search results

Summary of Contents for DESAXL

Reviews:

Related manuals for DESAXL

Brands by name

Popular brands