Bosch DESAXL Instruction Manual Download Page 42

Page: 42 / 76

| 42

Bosch Security Systems | November 17, 2004

DÉSA

Instruction Manual

System Setup Options

8.13 E-Map Setup Tab

8.13.1

Enable E-Map

Check Box

E-Map must be enabled (via this check box) to be used.

8.13.2 Position No.

Select the position of the E-Map for any or all divisions,
then select the cameo position for the E-Map.

NOTE: The E-Map can be set up in one division, and then
copied to another division in any cameo location. The E-Map
will take up the camera position in the screen division.

8.13.3 Import Image

Click

Find

, which opens the Windows dialogue box to

allow search of any drive or media present on the system.
Once the directory is specified, click

to load the

image.

NOTES:
• The image must be .BMP format.
• E-Map can only be used on the local Server; this feature is not available on the remote.

Summary of Contents for DESAXL













































































Search results

Summary of Contents for DESAXL

Reviews:

Related manuals for DESAXL

Brands by name

Popular brands

Bosch DESAXL, Instruction Manual

Search results

Summary of Contents for DESAXL

Reviews:

Related manuals for DESAXL

Brands by name

Popular brands