Bosch DESAXL Instruction Manual Download Page 12 | Manualshive

Page: 12 / 76

background image

EN

| 12

Bosch Security Systems | November 17, 2004

DÉSA

XL

|

Instruction Manual

|

Installation

5.4 Basic Connections

5.4.1 Connect cameras to BNC inputs labeled

1-16 or 1-8.

5.4.2 Connect the power cord (Ensure that the

Primary Disconnect Switch is in the OFF
(O) position).

5.4.3 Connect Ethernet cable (if used; not supplied).

5.4.4 Connect Speakers (if used; not supplied).

5.4.5 Connect Microphone (if used; not supplied).

5.4.6 Connect Audio Source (if used).

5.4.7 Connect External Monitor (requires

BNC-RCA adapter; not supplied).

5.4.8 Connect PC Monitor (not supplied).

5.4.9 Connect Grounding Shield Lug*

*NOTE: Twisted shielded cable is required for all

sensor inputs and auxiliary outputs.

5.5 Connecting Bosch AutoDomes

5.5.1 Requires the Bosch LTC 8786 to convert

from RS-232 to Biphase (if used; not
supplied).

5.5.2 Connect the supplied Watchdog/PTZ

control cable to the RS-232 input, on
the LTC 8786.

5.5.3 Connect the 2-conductor shielded biphase

wire from the AutoDomes to the biphase
output on the LTC 8786. The connections
are polarity-sensitive; (+) positive, (-)
negative, (S) shield. Use 18 - 2 twisted
shielded Belden 8760 or equivalent.

5.5.4 The LTC 8786 is recommended for use in

most cases, and supports 16 biphase outputs.
Control of AutoDomes should only be done
from an LTC 5136 or the GUI interface at a
time (not to be used simultaneously).

NOTE: The LTC 8786 DOES NOT need to be
reconfigured from the factory.

5.6 Connecting Other Manufacturer’s

Domes

The DÉSA

XL

provides two types of PTZ output:

•

RS-232 (typically connected to a converter)

•

RS-422

1. Top Pin (+) positive

2. Middle Pin (GND) ground

3. Bottom Pin (-) negative

NOTE: The Watchdog cable must be properly
connected to COM 1 and the DIN connector on
the Watchdog Card.

5.7 Connecting Sensor Inputs

• Connect one of the two conductors to the

proper sensor input 1-16 or 1-8.

• Connect the other conductor to the (GND)

ground input of the sensor input.

5.8 Connecting Control Outputs

• Connect one of the two conductors to the

proper control output 1-16 or 1-8.

• Connect the other conductor to the (GND)

ground input of the Control.

«
...
10
11
12
13
14
...
»

Summary of Contents for DESAXL













































































Reviews:

No comments

Related manuals for DESAXL

Brand: Datatoys Pages: 16

ELAN LUM-500-NVR-4CH

Brand: SnapAV Pages: 8

Brand: inforce Pages: 78

Brand: Q-See Pages: 7

Brand: CasaCam Pages: 31

Brand: Safe N Secure Pages: 36

Brand: Inter-m Pages: 84

Brand: Continental Access Pages: 131

EVD-04/050A1MJN

Brand: Euro Video Pages: 47

Brand: Euro Video Pages: 82

Brand: Vook Pages: 101

Brand: Vook Pages: 116

Camspot NVR 4.0

Brand: Overmax Pages: 152

Brand: WatchNet Pages: 2

Brand: GRASS VALLEY Pages: 80

Brand: HIKVISION Pages: 26

Brand: AlienDVR Pages: 56

Brand: Clinton Electronics Pages: 94

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands