EN
| 25
Bosch Security Systems | November 17, 2004
DÉSA
XL
|
Instruction Manual
|
System Setup Options
8.4.10 Transfer Quality
Transfer Quality
affects the amount of network bandwidth used, by compressing
the images requested from a Remote Client, for live display. This precompresses
the images before streaming to the Remote Client. The settings are
100%, 90%,
70%, 50%, and 30%
. This setting does not have any affect on streaming video
being searched from the remote, only streaming video being viewed live at the
remote.
8.4.11 Color of Motion Area
The selections to visually indicate that motion has been detected are
Red
or
Green
.
8.4.12 Full Screen When Motion
Select cameras in the dropdown list to cause those cameras
to display full screen when motion is detected. Set the
Dwell Time
for the video to remain full screen. Once the motion
has stopped and the dwell time has expired, the video reverts to
the previous multiscreen display. Click
No Full Screen
to clear
the selected cameras from being displayed full screen.
8.4.13 Set Quad Dwell Time
On the main monitor display there is a button that allows
sequencing of the quad displays. This
Dwell Time
designates the
duration of the quad’s display (in seconds), before switching to
the next quad display.
8.4.14 Recording Frame Rate per Camera
The capability of maximum frame rate is based upon
your system and the number of cameras connected and
enabled. Click
Default
to maximize the total available
frame rate to all cameras. Adjust the frame rates by
clicking and holding the slide bar, and moving it up or
down (system specific limitations may exist).
