Bosch DESAXL Instruction Manual Download

Page: 72 / 76

| 72

Bosch Security Systems | November 17, 2004

DÉSA

Instruction Manual

Remote Client Guide

Health Monitor

The Health Monitor displays the status of a connected Server. To display status of a

connected Server, click the plus sign in the directory tree on the left-hand side of the screen, select a Server from
the list, and click Connect

. The display now shows status of Cameras, Control Outputs, and Recording.

Emergency Monitor

: The

Emergency Monitor

screen displays realtime events from the Servers. Remote

notification must be configured to enable this function.

IntelliUpgrader

: The

IntelliUpgrader

allows the Remote Client to upgrade any of the DESA Servers.

Click

Package Select

and select the location of the latest software, then click

. Click

Start Update

connect to the selected server and start the update process. An update notification is displayed when the process
is finished.

NOTE:

Memo

and

System Log

, found at

the bottom of the screen,
are not yet available.

Summary of Contents for DESAXL













































































Search results

Summary of Contents for DESAXL

Reviews:

Related manuals for DESAXL

Brands by name

Popular brands

Bosch DESAXL, Instruction Manual

Search results

Summary of Contents for DESAXL

Reviews:

Related manuals for DESAXL

Brands by name

Popular brands