Bosch DESAXL Instruction Manual Download Page 19

Page: 19 / 76

| 19

Bosch Security Systems | November 17, 2004

DÉSA

Instruction Manual

System Setup Options

DÉSA

SYSTEM SETUP OPTIONS (Setup Button)

Click

Setup

to initiate

System Setup

8.1 Integrated Keyboard

8.1.1

The

Integrated Keyboard

icon is located at the

bottom of the

Setup

screens, and eliminates need

for a physically connected keyboard after initial
setup.

8.1.2

The

Integrated Keyboard

stays open while moving

between tabs. When finished, the

Integrated

Keyboard

must be closed.

NOTE: At times, a keyboard may need to be
reconnected to the system, so be sure the supplied
keyboard is available for advanced system
configuration.

8.2 Save and Close Buttons

8.2.1

Save

is used to retain any changes made in

each of the

Setup

menu tabs.

8.2.2

To save your changes, press

Save

before moving between tabs, and

before pressing

8.2.3

is used to close out of the

Setup

menus, exiting to the Main Display.

8.2.4

Closing the

Setup

menu without clicking

Save

results in no changes being made.

Summary of Contents for DESAXL













































































Search results

Summary of Contents for DESAXL

Reviews:

Related manuals for DESAXL

Brands by name

Popular brands

Bosch DESAXL, Instruction Manual

Search results

Summary of Contents for DESAXL

Reviews:

Related manuals for DESAXL

Brands by name

Popular brands