Bosch DESAXL Instruction Manual Download Page 61

Page: 61 / 76

| 61

Bosch Security Systems | November 17, 2004

DÉSA

Instruction Manual

Remote Client Guide

10.3 DESA

Remote Display

The buttons at the right of the screen provide functions in both the

Connected

state and the

Disconnected

state.

•

LIVE

is available when the Remote Client is connected to at least one DÉSA Server. When activated, the

button changes to

STOP

•

Before connection, searches video backup on the remote computer (or CD/DVD). After

connection, searches video on the local DÉSA

XL.

•

SETUP

(see SECTION 10.3.1 for further information)

Before connection, configures Remote Client software. After connection, allows modification of a subset of the
DÉSA

Server settings.

•

CONNECT

DISCONNECT

to the active DÉSA Server’s live feed.

•

MULTI-SITE

is only applicable when the remote station is connected to more than one DÉSA Server. This

function allows to clicking and dropping cameras from among the various servers, onto the remote view
screen.

Summary of Contents for DESAXL













































































Search results

Summary of Contents for DESAXL

Reviews:

Related manuals for DESAXL

Brands by name

Popular brands

Bosch DESAXL, Instruction Manual

Search results

Summary of Contents for DESAXL

Reviews:

Related manuals for DESAXL

Brands by name

Popular brands