Bosch DESAXL Instruction Manual Download Page 41

Page: 41 / 76

| 41

Bosch Security Systems | November 17, 2004

DÉSA

Instruction Manual

System Setup Options

8.12 Storage Setup Tab

8.12.1

Storage Setup

The

Storage Setup

screen shows the currently

allocated drives for the OS, and all video storage.

8.12.2 Modify storage structure

Click

Modify storage structure

to:

•

Purge video that is already stored on the allocated hard drives.

•

Allocate new storage space for video storage. Example: To add a DVAD JBOD Array, once connected
to the unit, the drive space must be allocated for video storage.

NOTES:
• Arrays can be added without deleting any of the existing stored video.
• Only

Allocation

buttons for the unallocated space can be modified.

• The system must be shut down and rebooted to start modifications. This will delete all previously recorded

video and create a new video storage structure.

Summary of Contents for DESAXL













































































Search results

Summary of Contents for DESAXL

Reviews:

Related manuals for DESAXL

Brands by name

Popular brands

Bosch DESAXL, Instruction Manual

Search results

Summary of Contents for DESAXL

Reviews:

Related manuals for DESAXL

Brands by name

Popular brands