Bosch DESAXL Instruction Manual Download Page 22

Page: 22 / 76

| 22

Bosch Security Systems | November 17, 2004

DÉSA

Instruction Manual

System Setup Options

8.3.4 External Monitor

This screen is used to select cameras to be displayed on the analog monitor
output.

8.3.4.1

Dwell (Sec)

is the time that each selected camera will be

displayed during sequence operation. Cameras are available
only if

Enabled

Camera Setup

Synchronize External Monitor

: Once cameras have been added and

saved, press this button to reset the sequencing.

8.3.5 PTZ Camera Alarm/Preset Setup

8.3.5.1

This option can only be used if there is a camera with

PTZ

selected in

Camera Setup

8.3.5.2

Press

Alarm/Preset

to display the

Setup

screen.

8.3.5.3

Cameras with

PTZ

selected appear on the

left side of the chart, and across the top are
the sensors (alarm inputs).

8.3.5.4

Click the box intersecting the desired
camera with the appropriate alarm. A
dropdown box with 1-10 presets will appear.
Select the preset to be associated with that
alarm input.

8.3.5.5

The same preset can be assigned to as many
of the cameras or alarm inputs as desired.

Summary of Contents for DESAXL













































































Search results

Summary of Contents for DESAXL

Reviews:

Related manuals for DESAXL

Brands by name

Popular brands

Bosch DESAXL, Instruction Manual

Search results

Summary of Contents for DESAXL

Reviews:

Related manuals for DESAXL

Brands by name

Popular brands