Bosch DESAXL Instruction Manual Download Page 50

Page: 50 / 76

| 50

Bosch Security Systems | November 17, 2004

DÉSA

Instruction Manual

9.3 IntelliSearch Graphical Display

This graph displays the recorded information in detail
and gives a colored indication of what type of recording
occurred. The graph is based on a 24-hour period and
can be zoomed in by clicking on the hours at the top of
the graph.

9.3.1

The color bars depict the type of recording that
occurred:

•

Pink

– Continuous Recording

•

Blue

– Motion Recording

•

Red

– Alarm Recording

•

Green

– Pre-alarm Recording

•

None

– Nothing has been recorded

9.4 Selecting Information Playback

To playback video, select the year, month, day, and
cameras to view. Click on the approximate time on the
graph, and the blue

Start

bar will move there.

Summary of Contents for DESAXL













































































Search results

Summary of Contents for DESAXL

Reviews:

Related manuals for DESAXL

Brands by name

Popular brands

Bosch DESAXL, Instruction Manual

Search results

Summary of Contents for DESAXL

Reviews:

Related manuals for DESAXL

Brands by name

Popular brands