EN
| 20
Bosch Security Systems | November 17, 2004
DÉSA
XL
|
Instruction Manual
|
System Setup Options
8.3 Hardware Setup Tab
8.3.1 Camera Setup
8.3.1.1
Use the
Camera Setup
section of the
Hardware Setup
tab to
Enable (Disable)
cameras connected to the system. Check
the box to enable camera input; uncheck
the box to disable camera input.
NOTE: Unchecking the box for a camera also disables
that camera in the
Screen Division
tab, and in the
External Monitor
section of the
Hardware Setup
tab. Re-enabling
the camera DOES NOT automatically re-enable these settings. The settings need to be manually restored.
8.3.1.2
Cam. ID
enables logical numbering of every camera in the system; typically used when multiple
DÉSA
XL
comprise a large system.
Cam. ID
directly relates to AutoDomes connected to the DÉSA
XL
system for control. The
Cam. ID
must match the address of the connected AutoDome.
8.3.1.3
Name
allows a camera description to be associated with each camera. Character length is limited to
13 uppercase characters or 14 lowercase characters.
8.3.1.4
Sensor
associates the physical sensors (alarm inputs) to a specific camera. Multiple sensors can be
associated with multiple cameras by separating the sensor numbers by commas i.e. 1,2,3, etc.
