BONFIGLIOLI active cube 201, Operating Instructions Manual

Page: 198 / 285

198 Operating Instructions ACU 12/16
AND connection, positive edge
Parameter
Operation Mode Timer 1
790 or
Operation Mode Timer 2
793 = 3
1) As soon as the positive signal edge is received at the input, time 1 is started.
2) If a positive signal edge is detected within the signal delay (Time 1), Time 1 will start again
(Retrigger).
3) Once the Time 1 (signal delay) has elapsed, the output signal will be switched for Time 2 (signal
duration).
4) Within the signal duration time 2, the output is switched off by the input signal (AND
connection).
5) If the input signal is present during the whole signal duration (Time 2), the output signal
remains on in this time.
: Time not run out completely
: Time run out completely
Factory settings: Time 1 = 0, Time 2 = 0
In the default settings, the output signal will follow the input signal.
16.5.2 Comparator
With the help of software functions Comparator 1 and 2, various comparisons of actual values with
percentage-adjustable fixed values can be done.
The actual values to be compared can be selected from the following table with the
parameters Op.
Mode Comparator 1
540
and Op. Mode Comparator 2
543 .
If an extension module is connected, further operation modes are available.
Operation mode 540, 543 Function
0 - off Comparator is switched off.
1 - Absolute current R.m.s Current 211 > Rated Current 371v
2 - Abs. Active Current Active Current 214 > Rated Current 371.
3 - Abs. Stator Frequency Stator Frequency 210 > Maximum Frequency 419.
4 - Abs. Actual Speed 1
Encoder 1 Speed 218 > max. speed (calculated from Maximum
Frequency 419 and No. of Pole Pairs 373) .
5 - Abs. Actual Repetition Freq. Repetition Frequency Input 252 > Maximum Frequency 419.
6 -
Winding Temperature,
Temp. Follow-Up
Winding Temperature 226 > Temperature 100 °C.
7 - Abs. Actual Frequency Actual Frequency 241 > Maximum Frequency 419.
9 - DC-Link Voltage DC-Link Voltage 222 > direct voltage 1000 V.
10 - Abs. Isq Isq 216 > Rated Current 371.
11 - Abs Filtered Active Current Active Current 214 > Rated Current 371.
12 - Abs. Internal Ref. Frequency Internal Reference Frequency 228 > Maximum Frequency 419.
13 - Abs. Ref. Percentage Value
Reference Percentage Value 229 > Maximum Reference
Percentage 519.
Input
Output
Time 2 Time 1 Time 1 Time 1 Time 2
1) 2) 3) 4) 5)
Input
Output