BONFIGLIOLI active cube 201, Operating Instructions Manual

Page: 197 / 285

12/16 Operating Instructions ACU 197
Parameter Setting
No. Description Min. Max. Factory setting
791 Time 1 Timer 1, signal delay 0.00 s/m/h 650.00 s/m/h 0.00 s/m/h
792 Time 2 Timer 1, signal duration 0.00 s/m/h 650.00 s/m/h 0.00 s/m/h
794 Time 1 Timer 2, signal delay 0.00 s/m/h 650.00 s/m/h 0.00 s/m/h
795 Time 2 Timer 2, signal duration 0.00 s/m/h 650.00 s/m/h 0.00 s/m/h
Examples of the timer function depending on the selected operation mode and the input signal:
Normal, positive edge
Parameter
Operation Mode Timer 1
790 or
Operation Mode Timer 2
793 = 1
As soon as the positive signal edge is received at the input, time 1 is started. Once the Time 1
(signal delay) has elapsed, the output signal will be switched for Time 2 (signal duration).
In the settings for signal duration (
Time 2 Timer 1
792 = 0 and
Time 2 Timer 2
795 = 0), the
output signal will not be reset.
Retrigger, positive edge
Parameter
Operation Mode Timer 1
790 or
Operation Mode Timer 2
793 = 2
As soon as the positive signal edge is received at the input, time 1 is started. If a positive signal
edge is detected within the signal delay (Time 1), Time 1 will start again (Retrigger). Once the Time
1 (signal delay) has elapsed, the output signal will be switched for Time 2 (signal duration).
In the settings for signal duration (
Time 2 Timer 1
792 = 0 and
Time 2 Timer 2
795 = 0), the
output signal will not be reset.
: Time not run out completely
: Time run out completely
Input
Output
Time 2
Time 1
Factory setting (Time 2 = 0)
Input
Output
Time 2 Time 1 Time 1
Facory setting (Time 2 = 0)