BONFIGLIOLI active cube 201, Operating Instructions Manual

Page: 19 / 285

12/16 Operating Instructions ACU 19
2.7 Directives and guidelines to be adhered to by the operator
The operator must follow the following directives and regulations:
 Ensure that the applicable workplace-related accident prevention regulations as well as other
applicable national regulation are accessible to the staff.
 An authorized person must ensure, before using the frequency inverter, that the device is used in
compliance with its designated use and that all safety requirements are met.
 Additionally, comply with the applicable laws, regulations and directives of the country in which
the frequency inverter is used.
 For liquid cooled frequency inverters, comply with the cooling water guideline VGB-R 455 P.
 Any additional guidelines and directives that may be required additionally shall be defined by the
operator of the machine/plant considering the operating environment.
2.8 Operator's general plant documentation
 In addition to the Operating Instructions, the operator should issue separate internal user
manuals for the frequency inverter. The Operating Instructions of the frequency inverter must be
included in the Operating Instructions of the whole plant.
2.9 Operator's/operating staff's responsibilities
2.9.1 Selection and qualification of staff
 Any work on the frequency inverter may only be carried out by skilled personnel. The staff must
not be under the influence of any drugs. Note the minimum age required by law. Define the staff's
responsibility pertaining to all work on the frequency inverter clearly.
 Work on the electrical components may only be performed by a qualified electrician according to
the applicable rules of electrical engineering.
 The operating staff must be trained for the relevant work to be performed.
2.9.2 General work safety
 In addition to the Operating Instructions of the machine/plant, any applicable legal or other
regulations relating to accident prevention and environmental protection must be complied with.
The staff must be instructed accordingly.
Such regulations and/or requirements may include, for example, handling of hazardous media and
materials or provision/use of personal protective equipment.
 In addition to these Operating Instructions, issue any additional directives that may be required to
meet specific operating requirements, including supervision and reporting requirements, e.g.
directives relating to work organization, workflow and employed staff.
 Unless approved of expressly by the manufacturer, do not modify the frequency inverter in any
way, including addition of attachments or retrofits.
 Only use the frequency inverter if the rated connection and setup values specified by the
manufacturer are met.
 Provide appropriate tools as may be required for performing all work on the frequency inverter
properly.
2.9.3 Ear protectors
 The frequency inverter produces noise. Due to noise development, frequency inverters should
only be installed in normally unstaffed areas.
 Noise emission in operation is < 85 dB(A) in the case of sizes 1 through 7.