BIKES – OWNER’S MANUAL
39
and you feel undesirable vibration
board for easier cleaning
- Make sure all nuts and bolts are in place and firmly tightened
Computer lights up, but speed is not
displayed
- Speed sensor is improperly aligned – Align or replace if necessary
- Speed sensor is improperly connected – Check connection
- Cable between computer and control card is damaged or defective – Replace
cable
6.3. SAFETY REQUIREMENTS
North America
These stationary bikes have been tested and are compliant with UL 1647 and CAN/CSA STD 60335-1.
International
The equipment listed in this manual has been tested to meet the Low Voltage Directive 2006/95/EC concerning electrical
and mechanical safety.
6.4. ELECTROMAGNETIC INTERFERENCE REQUIREMENTS
United States
The V6X/R6X has been tested and found to comply with the limits for Class B digital devices, pursuant to part 15 of the FCC
Rules.
The V9X/R9X has been tested and found to comply with the limits for Class A digital devices, pursuant to part 15 of the FCC
Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio/television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the distance between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
Canada
The V6X/R6X have been tested and found to comply with the limits for a Class B device, pursuant the standard NMB-003.
The V9X/R9X have been tested and found to comply with the limits for a Class A device, pursuant the standard NMB-003.
International
This equipment has been tested to comply with the Electromagnetic Compatibility directive 2004/108/EC as required by the
International Electrical Committee.
The V6X/R6X have been tested and found to comply with the limits for a Class B device and
The V9X/R9X have been tested and found to comply with the limits for a Class A device.
Summary of Contents for R6X
Page 2: ......
