Blue Coat SG810 series, Installation Manual

Page: 60 / 110

P/N 231-02941 SG810 Installation Guide page 60
where:
flash
Configures the LCD to flash. When set, the LCD
continues to flash until the user presses a front panel
button or the setting is changed through the CLI
command
no backlight flash
.
The flash setting can overwrite the backlight state
setting.
state off
Configures the LCD to always remain off when the
ProxySG is powered on. This is the default behavior.
on
Configures the LCD to always remain on when the
SG810 is powered on.
timeout
Configures the LCD to turn off after a specified
number of seconds. Use the
backlight timeout
seconds
command (described below) to specify the
number of seconds.
timeout seconds
Specifies the number of seconds that the LCD
remains on without activity. The
backlight
state timeout
command specifies an LCD
timeout; this command specifies the number of
seconds before timeout occurs.