Blue Coat SG810 series, Installation Manual

Page: 40 / 110

P/N 231-02941 SG810 Installation Guide page 40
7
On page 2, enter a console username and a console and enable password. A
default username (
admin
) is already in place—you can change it here.
Usernames and passwords can each be from 1 to 64 characters in length.
Passwords that contain special characters (such as an exclamation point) must
be in quotes.
Figure 2-5: Setup Console—Page Two
---
------------------- (page 2 of 5) ---------------------
Press <ESC> at any time to return to the main menu
DIRECTIONS:
The console username, password, and enable password are
special administrative credentials which can be used to log in
to the command line interface or web management interface.
WARNING - The console password and enable password are not
defined.
The system cannot start up until these are defined.
You must configure the console user account now.
Enter console username [admin]: admin
Enter console password: *****
Verify console password: *****
That password is easily guessed.Choose another? Y/N [Yes] No
Enter enable password: *****
Verify enable password: *****
That password is easily guessed.Choose another? Y/N [Yes] No