Blue Coat SG810 series, Installation Manual

Page: 37 / 110

P/N 231-02941 SG810 Installation Guide page 37
4
You can do one of the following:
• Type
M
to use the Manual Serial Setup Console. This option allows you to
continue using the serial console for fully configuring your SG810
appliance.
• Type
W
to use the Web Setup Wizard. This option requires you to assign
the IP address, IP subnet mask, and the IP gateway through the serial
console, then you can continue the configuration using the Web browser.
• Type
R
to use Director Registration.This option requires you to assign the
IP address, IP subnet mask, and the IP gateway for the SG810 and the IP
address for the Director through the serial console, before registering the
SG810 with a Director.