Blue Coat SG810 series, Installation Manual

Page: 32 / 110

P/N 231-02941 SG810 Installation Guide page 32
4
Enter information on each screen, as prompted, and click
Next
to proceed to
the next screen.
Each page is described; some pages include mouse-over help. To complete the
Setup Wizard you must:
a.
Enter the console access information in
Security > Console
.
b.
Enter the CLI Enable password in
Security > CLI
.
(Optional but highly recommended) Secure the serial port in
Security > Serial
Port
.
The serial port allows you to configure and access the SG810 using a serial
cable. This option allows you to set a password for the serial console setup,
thus enabling only authorized personnel (who have access to the serial port
password) to reconfigure the appliance.
c.
Enter the network settings:
❖ IP Address
❖ Subnet Mask
❖ Gateway
❖ DNS Server
d.
(Optional) Configure the Application Delivery Network (ADN) settings.
The ADN settings optimize the delivery of applications over the WAN.If
you choose to set up the ADN, you need to configure the
Primary ADN
Manager IP Address
and/or the
Backup ADN Manager IP Address
.
e.
Select the traffic types that the appliance should intercept in
Services >
Intercepted Traffic
.
f.
Set the
Default Settings
policy to either the MACH5 settings for WAN
acceleration or retain the default more secure settings.
Note: Select the license trial version that matches the license you
purchased, while buying the Proxy
SG 810 Series appliance.